ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Exhaust Gas Recirculation (EGR) Valve Outlet Tube - 2.4L Duratorq-TDCi (Puma) Diesel-3.2L Duratorq-TDCi (Puma) Diesel > < Exhaust Gas Recirculation (EGR) Cooler - 3.2L Duratorq-TDCi (Puma) Diesel

Transit 2006.5 (04.2006-)

Engine Emission Control - Exhaust Gas Recirculation (EGR) Cooler—2.4L Duratorq-TDCi (Puma) Diesel Transit 2006.5 (04/2006-)
Removal and Installation

General Equipment
Hose clamp remover/installer

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Drain the cooling system.
    Refer to: Cooling System Draining, Filling and Bleeding - 2.2L Duratorq-TDCi (Puma) Diesel/2.4L Duratorq-TDCi (Puma) Diesel/3.2L Duratorq-TDCi (Puma) Diesel, Vehicles With: Fuel Fired Booster Heater (303-03 Engine Cooling, General Procedures).
    Refer to: Cooling System Draining, Filling and Bleeding - 2.2L Duratorq-TDCi (Puma) Diesel/2.4L Duratorq-TDCi (Puma) Diesel/3.2L Duratorq-TDCi (Puma) Diesel, Vehicles Without: Fuel Fired Booster Heater (303-03 Engine Cooling, General Procedures).
  1. Lower the vehicle.

  1.  
    1. Torque: 25 Nm
    1. Torque: 48 Nm
    1. Torque: 23 Nm
  1. Raise and support the vehicle.

  1. Torque: 23 Nm

  1.  
    1. General Equipment: Hose clamp remover/installer
    1. Torque: 23 Nm

  1. General Equipment: Hose clamp remover/installer

Installation

  1. To install, reverse the removal procedure.

Exhaust Gas Recirculation (EGR) Valve Outlet Tube - 2.4L Duratorq-TDCi (Puma) Diesel-3.2L Duratorq-TDCi (Puma) Diesel > < Exhaust Gas Recirculation (EGR) Cooler - 3.2L Duratorq-TDCi (Puma) Diesel